Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Boise City?
Chimney liner installation in Boise City typically runs $2,800 to $6,500, and a partial chimney rebuild usually lands between $4,500 and $12,000 depending on how much masonry has to come down. A full reline on a single-story home with straightforward roof access often comes in near the lower end, while taller chimneys, offset flues, and rebuilds that reach the smoke chamber push toward the top. The written estimate we provide after inspecting your chimney sets the final price.
If you’ve been told your liner is cracked, deteriorating, or missing, you’re not alone. Boise City has a large stock of older homes with clay-tile flues that have taken decades of heating and cooling swings, and a fair number of newer builds where the original liner was undersized for the appliance now connected to it. Either way, the numbers below give you a realistic picture before anyone walks onto your roof.
Call (833) 486-7115 for a free estimate. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, gets a technician out to look at your flue.
Key Takeaways
- A standard stainless liner install in Boise City typically costs $2,800 to $6,500.
- Partial chimney rebuilds generally run $4,500 to $12,000; a full rebuild runs higher.
- HeatShield resurfacing repairs a damaged flue for a fraction of a full reline in many cases.
- Materials matter. DuraFlex, Olympia Chimney, Gelco, Famco, and Copperfield components are what professionals specify.
- Free estimates and upfront pricing. The written estimate is the final word on cost.
Chimney Liner & Rebuild Cost Breakdown (2026)
These ranges reflect what Boise City homeowners typically see for each part of the job. Every chimney is different, so treat these as ballpark figures until an inspection confirms what yours needs.
| Line Item | Typical Cost Range |
|---|---|
| Chimney inspection (Level 1 or 2) | $150 – $450 |
| Chimney sweep / creosote removal before reline | $200 – $500 |
| Stainless steel flexible liner install (single-story, standard flue) | $2,800 – $4,800 |
| Stainless liner install (two-story, offset, or insulated liner) | $4,200 – $6,500 |
| HeatShield flue resurfacing (partial repair instead of full reline) | $1,800 – $4,200 |
| Chimney cap and crown repair or replacement | $350 – $1,200 |
| Flashing repair | $300 – $900 |
| Partial chimney rebuild (above roofline) | $4,500 – $8,500 |
| Full chimney rebuild | $9,000 – $12,000+ |
| Smoke chamber repair | $800 – $2,500 |
Several things move those numbers. Liner length and diameter drive material cost more than anything else, and an insulated liner costs more than a bare one but performs better in Boise City’s cold winters. If your flue has offsets or bends, the install takes longer and the price reflects it. A rebuild that reaches below the roofline is a bigger masonry job than one that stops at the crown, and matching brick and mortar adds cost. The appliance matters too: a wood stove or oil furnace flue often needs a different liner spec than a standard open fireplace, and getting that spec right is the whole point.
We specify professional-grade materials for a reason. DuraFlex flexible liners and Olympia Chimney systems are built for durability and code compliance. Gelco and Famco components make up the caps, flashing, and venting that finish the job properly. Copperfield sourcing keeps parts genuine rather than aftermarket substitutes. Professional-grade materials, not hardware-store substitutes, is the standard we hold to on every liner and rebuild.
What Affects Chimney Liner & Rebuild Pricing in Boise City
- Chimney height and roof pitch. A tall chimney on a steep roof takes more labor and more staging to service safely. Boise City’s mix of foothill homes and valley homes means roof access varies a lot from one property to the next.
- Flue condition. A flue with cracked tiles, gaps in the mortar joints, or heavy creosote buildup needs prep work before a liner goes in. HeatShield resurfacing can repair a damaged flue in cases where a full liner isn’t warranted, which changes the scope and the price.
- Liner material and insulation. A standard stainless liner and an insulated stainless liner are priced differently, and the insulated version holds heat better through a Treasure Valley winter. We’ll walk you through which spec suits your appliance.
- Rebuild extent. A rebuild that replaces masonry from the roofline up is one job. A rebuild that extends into the smoke chamber or below is another. Exterior brick chimneys on older Boise City homes often show freeze-thaw spalling near the top, which drives the scope.
- The appliance connected. Wood-burning fireplaces, gas fireplaces, wood stoves, and furnace flues each call for different liner specs and venting. An oil or gas furnace flue may need a different setup than a fireplace.
- Code and permit requirements. Most jurisdictions require a permit for a chimney rebuild or major liner change, so it’s worth asking your local building department what applies to your address before work starts.
Local climate plays a real role here. Boise City’s freeze-thaw cycles through winter and dry, hot summers work on exterior masonry year after year. That’s why a rebuild that looked small from the ground can turn out to need more material once the top courses come down. It’s also why we inspect before we quote rather than guessing from a photograph.
Is a Chimney Liner Repair Cheaper Than a Full Reline?
Often yes. HeatShield resurfacing repairs a cracked or deteriorated flue at roughly $1,800 to $4,200, compared with $2,800 to $6,500 for a full stainless reline. When the flue is structurally sound but the interior surface has broken down, resurfacing can restore it without tearing out what’s there. When the flue is failing, has major gaps, or is the wrong size for the appliance, a new liner is the correct fix and resurfacing won’t hold.
Here’s the part most people don’t hear until they’ve had two or three quotes: it comes down to what the flue actually looks like inside. That’s a camera-and-inspection question, not a phone question. We use a Level 2 inspection to see the full run of the flue before recommending either route. HeatShield is a capability most generalist sweeps don’t offer, and it’s one reason we can sometimes repair rather than replace.
Call (833) 486-7115 for a free estimate and an honest answer on which route your chimney needs. The price is set per job by the written estimate.
How to Save on Chimney Liner & Rebuild
You can’t cheat physics, but you can make smart choices that keep the total down.
- Book the inspection first. A Level 1 or 2 inspection at $150 to $450 tells you exactly what’s wrong before you commit to a bigger job. Guessing is expensive.
- Handle repairs before they cascade. A crown crack or flashing issue that gets fixed at $350 to $1,200 today can let water into masonry and turn into a partial rebuild down the road.
- Ask whether resurfacing covers your case. If HeatShield resurfacing can restore your flue, you may skip the full reline cost entirely.
- Bundle the sweep with the inspection. If your chimney has creosote buildup and needs a reline, doing the sweep and inspection in one visit saves you a second trip and a second line item.
- Get the written estimate. Free estimates mean you can compare real numbers, not verbal ranges. Ask every contractor which liner brand they’ll install. The answer tells you plenty.
Free estimates. Upfront pricing. One call covers your sweep, inspection, and any repair, start to finish. Call (833) 486-7115 and we’ll get your numbers together.
Can You Match Existing Brick During a Rebuild in Boise City?
Sometimes, and it depends on what your chimney was built with. Older Boise City homes carry brick that’s no longer in production, and a perfect match isn’t always possible. In those cases we aim for a close match that looks right from the ground and blends with the house. If your home is newer or the brick is still available, a rebuild can read as nearly invisible.
Matching mortar matters as much as matching brick. The mortar joint color and profile affect how the rebuild reads, and getting that right is part of what a masonry rebuild involves. We’ll be straight with you about what’s achievable before any material is ordered.
What’s Included in a Chimney Liner Installation?
A typical liner installation in Boise City includes a sweep and inspection first, removal of the old liner or flue debris, installation of a DuraFlex or Olympia Chimney stainless liner sized for your appliance, connection at the top and bottom, a new cap or cap repair using Gelco or Famco components, and a final check before we close out the job. The scope varies with the job, so the written estimate spells out exactly what’s covered.
We do all three core services in-house: chimney sweeping, chimney inspection, and chimney repair. If you’re looking for chimney sweep Boise City service alongside your liner work, we can handle both in the same visit. If your project also touches the surrounding Boise City home, we’ll tell you what’s chimney scope and what isn’t, rather than leaving you to sort it out.
Safety matters here. A chimney liner carries combustion gases out of your home, and a failed liner is a serious hazard. We won’t walk you through a DIY liner install because the risks of carbon monoxide exposure and fire don’t belong in a how-to paragraph. This is a trained-professional job, and we treat it that way.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner cost in Boise City?
A stainless steel chimney liner typically costs $2,800 to $6,500 installed in Boise City. Single-story homes with straightforward flues sit near the low end, and two-story homes, offset flues, or insulated liners push toward the top. Call (833) 486-7115 for an exact quote. Estimates are free.
How much does a chimney rebuild cost in Boise City?
A partial chimney rebuild typically runs $4,500 to $8,500, and a full rebuild $9,000 to $12,000 or more. Scope drives the number: how much masonry comes down, whether it reaches below the roofline, and whether brick matching is needed. Call (833) 486-7115 for a free estimate on your rebuild.
Is it cheaper to repair or replace a chimney liner?
Repair is usually cheaper when it’s an option. HeatShield resurfacing runs $1,800 to $4,200 versus $2,800 to $6,500 for a full reline. But repair only works when the flue is structurally sound. An inspection tells you which route applies. Call (833) 486-7115 and we’ll give you a straight answer.
Can you come today?
Often yes. We answer 24/7 and fast dispatch from 7am to 7pm, Sunday through Friday, gets a technician out for an inspection or estimate. Call (833) 486-7115 to book. We’re closed Saturday, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Does chimney liner work need a permit in Boise City?
Most jurisdictions require a permit for a chimney rebuild or major liner change, so ask your local building department what applies to your address. We’ll flag the permit question when we give you the estimate. Call (833) 486-7115 for a free estimate and we’ll walk through what your job involves.
Why Materials Change the Price
A liner is not a liner. DuraFlex flexible liners and Olympia Chimney systems are professional-tier products built to spec, and they’re not found at big-box stores. HeatShield resurfacing is a specialty system most generalist sweeps can’t offer. Gelco and Famco parts make up the caps, flashing, and venting that finish the install properly. Copperfield sourcing keeps those parts genuine. Building on the brands chimney professionals rely on is how a liner lasts, and it’s how we quote every job. Our technicians have up to 8 years of experience, and we’re licensed and insured.
Certified-quality materials cost a little more up front. Choosing a bargain liner to save a few hundred dollars tends to cost more later when the flue has to be opened back up. We quote professional-grade because it’s what the job actually demands.
Ready to Know What Your Chimney Needs?
Boise City homeowners deserve a number they can trust and a scope they understand. Call (833) 486-7115 for a free estimate on chimney liner or rebuild work. Upfront pricing, an honest inspection, and professional-grade materials from the brands professionals specify. When you call, we’ll answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, gets a technician to your door.
Pricing reflects the Boise City market as of 2026. Chimney Sweep Boise City offers free estimates – call (833) 486-7115.
Written by the team at Chimney Sweep Boise City.
What Our Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Tracy Doyle"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Mark Kowalski"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Kevin Whitaker